Home / Products / Stainless Steel Recessed Covers
Photo: recessed stainless covers from our range, square and round formats.
Product Detail
Stainless Steel Recessed Covers
Recessed tray covers in 304 stainless steel for paved areas — plazas, malls, hotels and courtyards — where a visible cast iron cover would spoil the surface. The tray takes your own paving material, so the finished floor runs straight over the chamber. Every cover is made to order to your opening by a partner workshop; Hongcheng confirms the drawing with you and checks the finished covers before dispatch.
Recessed covers are normally used in pedestrian and paved areas. If vehicles will cross the cover, tell us before ordering — the workshop confirms the reinforcement for the location first.
| Material | 304 stainless steel (frame, tray and lid) |
|---|---|
| Format | Recessed tray for paving infill; finished surface sits flush |
| Frame height | 50 mm (as on our recent custom orders) |
| Plate thickness | 3.75 mm sheet (recent custom orders) |
| Reinforcement | Ribbed reinforcement under the tray, detailed per order |
| Openings | Single-opening and multi-opening layouts, split to your chamber |
| Custom example | 600×2200 clear opening → 760×2360 outer frame, three-opening, 50 mm frame height |
| Sizes | Made to order to your clear opening — e.g. 600×600, 600×400, 600×300 |
| Supply | Supplied through our partner factories — sourced & quality-checked by Hongcheng, Dongguan |
Material & Structure
A Tray That Disappears into the Floor
The cover is a shallow stainless tray set in a matching frame. Your paving — tile, stone or concrete — is laid into the tray, so from above you see only the paving and a fine stainless edge line around it. Lifting keys engage slots in the tray to raise it for access.
Under the tray, welded ribs carry the load across to the frame. Because every cover is made to a confirmed drawing — clear opening, outer frame, number of openings, frame height — the drawing check before production is the most important step of the order.
- ✓304 stainless steel throughout
- ✓Takes your paving material — surface stays continuous
- ✓Made to your clear opening; single or multi-opening
- ✓Drawing confirmed with you before production starts
Documents
Product Information We Can Provide
A product specification sheet for your confirmed size and load class can be provided with the order on request. This website makes no certification claims: if your project requires specific documentation, state it in your inquiry and we will confirm exactly what we can provide before you order.
Packing & Transport
How the Goods Are Packed
Finished covers are protected on faces and edges and packed flat for transport, per the confirmed order. The final packing arrangement and transport plan are confirmed with you per order, as part of the quotation.
Ordering
How an Inquiry Works
Send Your Specification
Tell us the product, size, load class (where applicable) and quantity — WhatsApp is fastest.
Check & Confirm
We confirm the exact specification against the physical product, so the quotation matches the goods.
Quotation & Confirmation
You receive the quotation from Li Xiaopeng directly, and we confirm the final specification together before any order is placed.
Questions
Stainless Steel Recessed Covers — FAQ
How do I measure for a recessed cover?
Measure the clear opening of the chamber (inside width × length) and tell us the finished floor build-up. We convert it to the outer frame size on the drawing — for example, a 600×2200 clear opening became a 760×2360 outer frame on a recent order.
Can one cover span a long chamber?
Yes — long chambers use multi-opening covers: one outer frame with two, three or more trays side by side, split to your layout. The 600×2200 example above is a three-opening cover.
What paving can go into the tray?
Tile, stone and similar paving used on the surrounding floor. The tray depth is set by the 50 mm frame height on our recent orders; tell us your paving thickness so the workshop allows for it.
Is it suitable for vehicle areas?
These covers are normally specified for pedestrian and paved areas. If any vehicle will cross, say so in your inquiry — reinforcement is confirmed with the workshop for that case before we quote.
What should I include in my inquiry?
Clear opening size, number of openings, paving type and thickness, quantity, and your destination country (and port, if known). A chamber photo or drawing speeds things up.
Request a Quote
Request a Quote for This Product
Fill in the form — it opens WhatsApp with your inquiry already written out, addressed to Li Xiaopeng. Or email us at 615535816@qq.com.